"Extra Strength Connecting Link"
1. CONNECTING LINK AS STRONG AS REGULAR LINK
Up to 65% greater fatigue strength than conventional loose fit type
2. UP TO 27% HIGHER HORSEPOWER RATING
You can use a motor having up to 27% higher horsepower by just using D.I.D
XT POWER LINK
3. NO NEED TO SELECT LARGER SIZE CHAIN BECAUSE OF THE CONNECTING LINK
D.I.D's unique CBP (Compression Beveling Process) eliminates all the
weakness of connecting link plate. The fatigue strength of D.I.D ANSI
standard series is 100% of the chain body.
4. D.I.D XT POWER LINK, The Standard Connecting Link for D.I.D ANSI
You do not have to anticipate paying any extra to get this connecting link
for your standard chain requirements. Uniform strength including
connecting link, the D.I.D ADVANTAGE.
The DID standard roller chains are available in 14 sizes ranging from
RC25 to RC240. All are in conformity with JIS (Japanese Industrial
Standards) and ANSI (American National Standard Institute) standards.
D.I.D K Series roller chain is designed to obtain higher tensile strength
and shock load capacity with the same physical dimensions as ANSI standard
roller chain. K Series roller chain is recommended for slow to moderate
speed drive and heavy load conditions.
D.I.D Rustless Chain is an outstanding corrosion resistant chain because
its surface is nickel plated. In applications where chain is exposed to
the possibility of hydrogen brittlement caused by acid vapor or salty
environment, nickel plating delays the corrosive effect on the chain.
The demand for and lower equipment noise in the working significant
environment is growing. The chain greatly enhanced in silencing effect to
meet such demands is the DID Low Noise Chain Series. In printing,
packaging, engineering, parking and various conveyors, low noise chain
provides a silencing effect.
A "two piece roller structure" achieves a significant noise reduction
effect. hen the chain is engaged with a sprocket, the audible shock is
reduced by the elastic deformation of rollers, made of special elastomer,
achieving a silencing effect as much as 10 DB. When the chain is used for
conveying, the sliding noise between the rails and the rollers is
effectively reduced. Available sizes are RC40SLN to 80SLN.
In general, Small Sized Roller Chain for Conveyor Applications are
operated for longer distances and at lower speeds than transmission chain.
In this case, even if the plate pitch is double with the pins, bushings
and rollers unchanged , to half the number of teeth engaged with the
sprockets, the wear of pins bushings and rollers is small since the chain
speed is low, while the number overall is halved. DID Double Pitch Chain,
conform to ANSI and are manufactured in "Ultimate Life Chain Series" and
"Environment Resistant Chain Series," as are single pitch chain.
Generally, sprockets for double pitch chain utilize single pitch type
A DID flexible chain is a roller chain which can be greatly bent in the
transverse direction, and is suitable for curved traveling. For the chain,
sprockets for JIS/ANSI Standard Roller Chain can be used. This chain with
attachments can also be used as a conveyor for curved applications.